Desalination of duck egg white by biocoagulation to obtain peptide-ferrous chelate as iron delivery system: Preparation, characterization, and Fe2+ release evaluation in vitro.

The annual output of salted duck egg white (SDEW) is estimated to be over 1.5 million tons in China, most of which is discarded due to high salt content. This has led to serious waste and environmental impact. Therefore, we developed an eco-friendly biocoagulation separation technology by combining chitosan and sodium alginate in order to produce a novel iron-binding peptide (DPs-Fe2+) from SDEW. The structure of DPs-Fe2+ was characterized by ultraviolet-visible spectroscopy, fluorescence spectroscopy, and Fourier transform infrared spectroscopy, followed by measuring DPs-Fe2+ response in a simulated digestion/Caco-2 cell model. Results showed that chitosan and sodium alginate complex could remove 91.21% of salt from SDEW, and the protein recovery rate reached 95.50%. Characterization results indicated that DPs bonded with Fe2+ to form a soluble chelate. Moreover, Caco-2 cell monolayer model indicated that the transport rate of Fe2+ was as high as 10.02% at 0.1 mg/ml concentration of digested chelates. The results demonstrate the potential application of DPs as a novel carrier for enhancing iron absorption. This research contributes to the development of an effective industrial desalination method and highlights an opportunity for recycling an otherwise discarded processing byproduct. PRACTICAL APPLICATION: Salted duck egg whites (SDEW) are the primary byproduct of salted egg yolk production, most of which is discarded due to high salt content. Hence, efficient utilization of the high-value proteins in SDEW is an urgent problem that must be resolved. Herein, we developed an effective industrial desalination method by combining chitosan and sodium alginate, which achieved excellent SDEW desalination and protein recovery. Furthermore, we produced a novel iron-binding peptide (DPs-Fe2+), which enhanced the transportation and absorption of Fe2+ in Caco-2 cell model, suggesting its potential as an iron supplement.

Tomato (Solanum lycopersicum L.) seed: A review on bioactives and biomedical activities.

The processing of tomato fruit into puree, juices, ketchup, sauces, and dried powders generates a significant amount of waste in the form of tomato pomace, which includes seeds and skin. Tomato processing by-products, particularly seeds, are reservoirs of health-promoting macromolecules, such as proteins (bioactive peptides), carotenoids (lycopene), polysaccharides (pectin), phytochemicals (flavonoids), and vitamins (α-tocopherol). Health-promoting properties make these bioactive components suitable candidates for the development of novel food and nutraceutical products. This review comprehensively demonstrates the bioactive compounds of tomato seeds along with diverse biomedical activities of tomato seed extract (TSE) for treating cardiovascular ailments, neurological disorders, and act as antioxidant, anticancer, and antimicrobial agent. Utilization of bioactive components can improve the economic feasibility of the tomato processing industry and may help to reduce the environmental pollution generated by tomato by-products.

Assessment of anammox, microalgae and white-rot fungi-based processes for the treatment of textile wastewater.

The treatability of seven wastewater samples generated by a textile digital printing industry was evaluated by employing 1) anammox-based processes for nitrogen removal 2) microalgae (Chlorella vulgaris) for nutrient uptake and biomass production 3) white-rot fungi (Pleurotus ostreatus and Phanerochaete chrysosporium) for decolorization and laccase activity. The biodegradative potential of each type of organism was determined in batch tests and correlated with the main characteristics of the textile wastewaters through statistical analyses. The maximum specific anammox activity ranged between 0.1 and 0.2 g N g VSS-1 d-1 depending on the sample of wastewater; the photosynthetic efficiency of the microalgae decreased up to 50% during the first 24 hours of contact with the textile wastewaters, but it improved from then on; Pleurotus ostreatus synthetized laccases and removed between 20-62% of the colour after 14 days, while the enzymatic activity of Phanerochaete chrysosporium was inhibited. Overall, the findings suggest that all microbes have great potential for the treatment and valorisation of textile wastewater after tailored adaptation phases. Yet, the depurative efficiency can be probably enhanced by combining the different processes in sequence.

Effect of nutritional supplements on bio-plastics (PHB) production utilizing sugar refinery waste with potential application in food packaging.

Polyhydroxyalkanoates (PHAs) are intracellular carbon and energy storage reserve material stored by gram-negative bacteria under nutrient limitation. PHAs are best alternative biodegradable plastics (bio-plastics) due to their resemblance to conventional synthetic plastic. The present study investigated the synergistic effect of nutritional supplements (amino acid and vitamin) on the PHA production by Alcaligenes sp. NCIM 5085 utilizing a sugar refinery waste (cane molasses) under submerged fermentation process. Initially, the effect of individual factor on PHA yield was studied by supplementing amino acids (cysteine, isoleucine, and methionine), vitamin (thiamin), and cane molasses at varying concentration in the production medium. Further, the cultivation medium was optimized by varying the levels of cane molasses, methionine and thiamin using response surface methodology to enhance the PHA yield. The maximum PHA yield of 70.89% was obtained under the optimized condition, which was then scaled up on 7.5 L-bioreactor. Batch cultivation in 7.5 L-bioreactor under the optimized condition gave a maximum PHA yield and productivity of 79.26% and 0.312 gL-1 h-1, respectively. The PHA produced was subsequently characterized as PHB by FTIR. PHB extracted was of relatively high molecular weight and crystallinity index. DSC analysis gave Tg, Tm, and Xc of 4.2, 179 °C and 66%, respectively. TGA analysis showed thermal stability with maximized degradation occurring at 302 °C, which is above the melting temperature (179 °C) of the purified polymer. The extracted polymer, therefore, possessed desirable material properties to be used in food packaging.

Removal mechanisms of volatile organic compounds (VOCs) from effluent of common effluent treatment plant (CETP).

This study investigated the occurrence, removal and influence of plant-operating conditions on removal mechanisms of 83 VOCs in different treatment units of a CETP in Mumbai, treating industrial waste on primary and secondary level. A mass balance approach was used to predict VOC removal by volatilization, stripping, weir drop, adsorption, and biodegradation. Results indicate that ∼17% of VOCs were removed by stripping in equalization tank and ∼8% were removed by weir drop in primary clari-flocculator respectively. Biodegradation was the dominant mechanism in aeration tank and was relatively poor for hydrophobic compounds which were more vulnerable to removal by stripping. Stripping rates could be reduced by increasing the active biomass concentration and using fine pore diffusers to reduce the air/effluent ratio. Decrease in Henry's constant and compound concentration can shift the main removal mechanism from stripping to biodegradation. Results also show considerable agreement between measured (71.2%) and predicted (67.1%) total removal, especially in aeration tanks. Equalization tanks (actual, 20.5%, predicted, 16.9%), primary clari-flocculator (actual, 14.2%, predicted, 7.7%), and secondary clarifier units (actual, 29.5%, predicted, 16.8%) showed fairly acceptable differences in measured and predicted removal. The effect of other mechanisms on VOC removal need to be further explored owing to their major contribution to VOC removal. This study is the first attempt in understanding the mechanisms behind the removal of VOCs in each treatment unit, especially equalization tanks and clarifier units, which have been severely underestimated till date.

Kinetics and equilibrium adsorption study of selenium oxyanions onto Al/Si and Fe/Si coprecipitates.

Inappropriate treatments for the effluents from semiconductor plants might cause the releases and wide distributions of selenium (Se) into the ecosystems. In this study, Al/Si and Fe/Si coprecipitates were selected as model adsorbents as they often formed during the wastewater coagulation process, and the removal efficiency of selenite (SeO3) and selenate (SeO4) onto the coprecipitates were systematically examined. The removal efficiency of SeO3 and SeO4 was highly related to surface properties of Al/Si and Fe/Si coprecipitates. The surface-attached Al shell of Al/Si coprecipitates shielded a portion of negative charges from the core SiO2, resulting in a higher point of zero charge than that of Fe/Si coprecipitates. Thus, adsorption of SeO3/SeO4 was favorable on the Al/Si coprecipitates. Adsorptions of both SeO3 and SeO4 on Al/Si coprecipitates were exothermic reactions. On Fe/Si coprecipitates, while SeO3 adsorption also showed the exothermic behavior, SeO4 adsorption occurred as an endothermic reaction. The kinetic adsorption data of SeO3/SeO4 on Al/Si and Fe/Si coprecipitates were described well by the pseudo-second-order kinetic model. SeO4 and SeO3 adsorption on Fe/Si or Al/Si were greatly inhibited by the strong PO4 ligand, whereas the weak ligand such as SO4 only significantly affected SeO4 adsorption. The weakest complex between SeO4 and Al was implied by the essentially SeO4 desorption as SeO4/PO4 molar ratios decreased from 0.5 to 0.2. These results were further confirmed by the less SeO4 desorption (41%) from Fe/Si coprecipitates than that from Al/Si coprecipitates (78%) while PO4 was added sequentially.

Pectin microgel particles as high adsorption rate material for methylene blue: Performance, equilibrium, kinetic, mechanism and regeneration studies.

The pectin gel has been proved to be an effective material for methylene blue (MB) removal, but it presented low adsorption rate. To get over the vice, the pectin microgel particles (PMP) was prepared. No matter high or low initial MB concentration, the PMP presented high adsorption rate with equilibrium time of 20min. The adsorption process based on monolayer adsorption and adsorbance of 284.09mg/g was obtained. What's more, the adsorption process was electrostatic adsorption with mean free energy of 74.223kJ/mol. The pseudo-second-order kinetic model fitted perfectly to the experimental data. The MB uptake was controlled by film diffusion mechanism. Furthermore, the recovery efficiency of regenerated PMP were higher than 80% after three cycles. The present study showed the PMP presented acceptable adsorbance, high adsorption rate and recovery efficiency. Thus, we believe that the PMP was a promising candidate for MB cleanup.

Ricinus communis L. (castor bean) as a potential candidate for revegetating industrial waste contaminated sites in peri-urban Greater Hyderabad: remarks on seed oil.

Ricinus communis L. (castor bean or castor oil plant) was found growing on metal-contaminated sites (4) of peri-urban Greater Hyderabad comprises of erstwhile industrial areas viz Bollaram, Patancheru, Bharatnagar, and Kattedan industrial areas. During 2013-2017, about 60 research papers have appeared focusing the role of castor bean in phytoremediation of co-contaminated soils, co-generation of biomaterials, and environmental cleanup, as bioenergy crop and sustainable development. The present study is focused on its use as a multipurpose phytoremediation crop for phytostabilization and revegetation of waste disposed peri-urban contaminated soils. To determine the plant tolerance level, metal accumulation, chlorophyll, protein, proline, lipid peroxidation, oil content, and soil properties were characterized. It was noticed that the castor plant and soils have high concentration of metals such as cadmium (Cd), lead (Pb), iron (Fe), manganese (Mn), and zinc (Zn). The soils have high phosphorous (P), adequate nitrogen (N), and low concentration of potassium (K). Iron (Fe) concentrations ranged from1672±50.91 to 2166±155.78 mg kg-1 in the soil. The trend of metal accumulation Fe>Zn>Mn>Pb>Cd was found in different plant parts at polluted sites. The translocation of Cd and Pb showed values more than one in industrial areas viz Bollaram, Kattedan, and Bharatnagar indicating the plants resistance to metal toxicity. Chlorophyll and protein content reduced while proline and malondialdehyde increased due to its tolerance level under metal exposure. The content of ricinoleic acid was higher, and the fatty acids composition of polluted areas was almost similar to that of the control area. Thus, R. communis L. can be employed for reclamation of heavy metal contaminated soils.

Optimization of operating parameters of novel composite adsorbent for organic pollutants removal from POME using response surface methodology.

The present work aimed to develop a novel composite material made up of activated cow bone powder (CBP) as a starting material for reducing chemical oxygen demand (COD) and ammonia-nitrogen (NH3N) from palm oil mill effluent (POME). The optimization of the reduction efficiency was investigated using response surface methodology (RSM). Six independent variables used in the optimization experiments include pH (4-10), speed (0.27-9.66 rcf), contact time (2-24 h), particle size (1-4.35 mm), dilution factor (100-500) and adsorbent dosage (65-125 g/L). The chemical functional groups were determined using Fourier transform irradiation (FTIR). The elemental composition were detected using SEM-EDX, while thermal decomposition was investigated using thermo gravimetric analysis (TGA) in order to determine the effects of carbonization temperature on the adsorbent. The results revealed that the optimal reduction of COD and NH3N from raw POME was observed at pH 10, 50 rpm, within 2 h and 3 mm of particle size as well as at dilution factor of 500 and 125 g L-1 of adsorbent dosage, the observed and predicted reduction were 89.60 vs. 85.01 and 75.61 vs. 74.04%, respectively for COD and NH3N. The main functional groups in the adsorbent were OH, NH, CO, CC, COC, COH, and CH. The SEM-EDX analysis revealed that the CBP-composite has a smooth surface with high contents of carbon. The activated CBP has very stable temperature profile with no significant weight loss (9.85%). In conclusion, the CBP-composite investigated here has characteristics high potential for the remediation of COD and NH3N from raw POME.

Optimization of enzymatic hydrolysis and fermentation conditions for improved bioethanol production from potato peel residues.

The aim of this work was the optimization of the enzyme hydrolysis of potato peel residues (PPR) for bioethanol production. The process included a pretreatment step followed by an enzyme hydrolysis using crude enzyme system composed of cellulase, amylase and hemicellulase, produced by a mixed culture of Aspergillus niger and Trichoderma reesei. Hydrothermal, alkali and acid pretreatments were considered with regards to the enhancement of enzyme hydrolysis of potato peel residues. The obtained results showed that hydrothermal pretreatment lead to a higher enzyme hydrolysis yield compared to both acid and alkali pretreatments. Enzyme hydrolysis was also optimized for parameters such as temperature, pH, substrate loading and surfactant loading using a response surface methodology. Under optimized conditions, 77 g L-1 of reducing sugars were obtained. Yeast fermentation of the released reducing sugars led to an ethanol titer of 30 g L-1 after supplementation of the culture medium with ammonium sulfate. Moreover, a comparative study between acid and enzyme hydrolysis of potato peel residues was investigated. Results showed that enzyme hydrolysis offers higher yield of bioethanol production than acid hydrolysis. These results highlight the potential of second generation bioethanol production from potato peel residues treated with onsite produced hydrolytic enzymes. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:397-406, 2017.

Ethanol production from a biomass mixture of furfural residues with green liquor-peroxide saccarified cassava liquid.

BACKGROUND: As the most abundant renewable resources, lignocellulosic materials are ideal candidates as alternative feedstock for bioethanol production. Cassava residues (CR) are byproducts of the cassava starch industry which can be mixed with lignocellulosic materials for ethanol production. The presence of lignin in lignocellulosic substrates can inhibit saccharification by reducing the cellulase activity. Simultaneous saccharification and fermentation (SSF) of furfural residues (FR) pretreated with green liquor and hydrogen peroxide (GL-H2O2) with CR saccharification liquid was investigated. The final ethanol concentration, yield, initial rate, number of live yeast cells, and the dead yeast ratio were compared to evaluate the effectiveness of combining delignificated lignocellulosic substrates and starchy substrates for ethanol production. RESULTS: Our results indicate that 42.0 % of FR lignin removal was achieved on FR using of 0.06 g H2O2/g-substrate and 9 mL GL/g-substrate at 80 °C. The highest overall ethanol yield was 93.6 % of the theoretical. When the ratio of 0.06 g/g-H2O2-GL-pretreated FR to CR was 5:1, the ethanol concentration was the same with that ratio of untreated FR to CR of 1:1. Using 0.06 g/g-H2O2-GL-pretreated FR with CR at a ratio of 2:1 resulted in 51.9 g/L ethanol concentration. Moreover, FR pretreated with GL-H2O2 decreased the concentration of byproducts in SSF compared with that obtained in the previous study. CONCLUSIONS: The lignin in FR would inhibit enzyme activity and GL-H2O2 is an advantageous pretreatment method to treat FR and high intensity of FR pretreatment increased the final ethanol concentration. The efficiency of ethanol fermentation of was improved when delignification increased. GL-H2O2 is an advantageous pretreatment method to treat FR. As the pretreatment dosage of GL-H2O2 on FR increased, the proportion of lignocellulosic substrates was enhanced in the SSF of the substrate mixture of CR and FR as compared with untreated FR. Moreover, the final ethanol concentration was increased with a high ethanol yield and lower byproduct concentrations.

Facilitating the enzymatic saccharification of pulped bamboo residues by degrading the remained xylan and lignin-carbohydrates complexes.

Kraft pulping was performed on bamboo residues and its impact on the chemical compositions and the enzymatic digestibility of the samples were investigated. To improve the digestibility of sample by degrading the xylan and lignin-carbohydrates complexes (LCCs), xylanase and α-L-arabinofuranosidase (AF) were supplemented with cellulase. The results showed more carbohydrates were remained in the samples pulped with low effective alkali (EA) charge, compared to conventional kraft pulping. When 120 IU/g xylanase and 15 IU/g AF were supplemented with 20 FPU/g cellulase, the xylan degradation yield of the sample pulped with 12% EA charge increased from 68.20% to 88.35%, resulting in an increased enzymatic saccharification efficiency from 58.98% to 83.23%. The amount of LCCs in this sample decreased from 8.63/100C9 to 2.99/100C9 after saccharification with these enzymes. The results indicated that degrading the remained xylan and LCCs in the pulp could improve its enzymatic digestibility.

Removal of copper ions from aqueous solution by adlai shell (Coix lacryma-jobi L.) adsorbents.

Adlai shell (Coix lacryma-jobi L.) adsorbents (ASA) were used to remove copper ions from aqueous solutions under batch conditions. The effect of physical and chemical modification of ASA on Cu(II) removal was evaluated. Results showed that the high coefficients of determination for the pseudo-second order (R(2) > 0.9999) and for the intraparticle diffusion (R(2) > 0.9843) equations indicate that the rate-determining step is a combination of pore diffusion and chemisorption at low Cu(II) concentration and boundary layer, pore diffusion and chemisorption at high Cu(II) concentration. At 298K and 100 mg L(-1) Cu(II), the computed qe and k2 values were 17.2 mg g(-1) and 0.012 g mg(-1) min(-1), respectively. The Freundlich model (R(2) > 0.9636) adequately describes the experimental data indicating heterogeneous adsorption. Overall, the results of the study demonstrate the potential of adlai shell adsorbents for the removal of heavy metals from aqueous solutions.

Macroscopic modelling of bioethanol production from potato peel wastes in batch cultures supplemented with inorganic nitrogen.

Inorganic nitrogen supplementation is commonly used to boost fermentation metabolism in yeast cultures. However, an excessive addition can induce an opposite effect. Hence, it is important to ensure that the ammonia supplemented to the culture leads to an improvement of the ethanol production while avoiding undesirable inhibition effects. To this end, a macroscopic model describing the influence of ammonia addition on Saccharomyces cerevisiae metabolism during bioethanol production from potato peel wastes has been developed. The model parameters are obtained by a simplified identification methodology in five steps. It is validated with experimental data and successfully predicts the dynamics of growth, substrate consumption (ammonia and fermentable sugar sources) and bioethanol production, even in cross validation. The model is used to determine the optimal quantity of supplemented ammonia required for maximizing bioethanol production from potato peel wastes in batch cultures.

Canola meal as a novel substrate for ß-glucosidase production by Trichoderma viride: application of the crude extract to biomass saccharification.

ß-Glucosidases are important enzymes with significant prospects in the industrial biotechnology, including their use in biomass hydrolysis for bioethanol production. In this study, the use of canola meal as carbon source for ß-glucosidase production by a Trichoderma viride strain in submerged fermentation was evaluated by applying central composite design and response surface methodology to optimize the production process. This statistical approach was also used to improve the passion fruit peel hydrolysis by T. viride crude extract. The model developed 3.6-fold increased ß-glucosidase activity. The culture conditions that resulted in the highest ß-glucosidase levels were a substrate concentration of 2.9 %, pH of medium 4.2 and cultivation time of 206 h. The ß-glucosidases produced under optimal conditions showed attractive properties for industrial applications, such as activity at high temperatures and stability at 55 °C and over a wide pH range. In addition, the enzymatic hydrolysis of passion fruit peel by T. viride crude extract was very promising, resulting in glucose yields of 66.4 %. This study, therefore, presents canola meal as an inexpensive and attractive substrate for the production of microbial ß-glucosidases.

[Pollution hazard for water bodies at oil production].

In the paper there have been summarizes the concepts of the danger of the pollution ofwater bodies in oil production (the most dangerous are reagents used in the drilling, drilling waste, oil and petrochemicals, oil biodestructors. There was shown the danger of the spread of oil pollution. New indices, presenting a hazard during drilling and oil production have been substantiated The tasks aimed to the improvement of the standards and methods of the control of the water pollution by oil, as well as of the documents regulating the conditions of environmental protection during the drilling have been conceived.

Biogas production within the bioethanol production chain: Use of co-substrates for anaerobic digestion of sugar beet vinasse.

Bioethanol production generates large amounts of vinasse, which is suitable for biogas production. In this study, the anaerobic digestion of sugar beet vinasse was optimised using continuous stirred-tank reactors (CSTR) supplemented either with lime fertiliser or with 3% cow manure. In both reactors, the C/N ratio was adjusted by adding straw. The biochemical methane potential (BMP) of vinasse was 267.4±4.5LCH4kgVS(-1). Due to the low content of macro- and micronutrients and low C/N ratio of vinasse, biogas production failed when vinasse alone was fed to the reactor. When co-substrate was added, biogas production achieved very close to the BMP of vinasse, being 235.7±32.2LCH4kgVS(-1) from the fertiliser supplied reactor and 265.2±26.8LCH4kgVS(-1) in manure supplied reactor at steady state. Anaerobic digestion was the most stable when cow manure was supplied to digestion of vinasse.

Optimization of liquid-liquid extraction of biosurfactants from corn steep liquor.

In this work, the optimization of the operational conditions for the chloroform-based extraction of surface-active compounds from corn steep liquor (CSL) was carried out and the nutritional properties of the remnant aqueous phase (CSL-less biosurfactant) was evaluated as microbial fermentation medium. The optimal conditions to obtain biosurfactants from CSL were as follows: chloroform/CSL ratio 2 (v/v), 56 °C at extraction times >30 min. At the optima conditions, 100 % of biosurfactant extract can be obtained from CSL, obtaining 12.0 ± 0.5 g of biosurfactant extract/Kg of CSL. The critical micelle concentration (CMC) of the biosurfactant extract was 399.4 mg L(-1). This value is similar to the CMC of cetrimonium bromide (CTAB), a cationic surfactant used in the formulation of nanoparticles. The extraction of biosurfactant can be also carried out at room temperature although in this case, the extraction yield decreased about 15 %. The extraction of surface-active compounds from agroindustrial streams can suppose important advances for the bio-based surfactants industry. Biosurfactants obtained in this work are not only more eco-friendly than chemical detergents but also can be cost competitive with its chemical counterparts. Furthermore, after the extraction of surface-active compounds, CSL-less biosurfactant was found to be suitable as nutritional supplement for lactic acid bacteria, maintaining its nutritional properties in comparison with regular CSL.

Cassava stillage and its anaerobic fermentation liquid as external carbon sources in biological nutrient removal.

The aim of this study was to investigate the effects of one kind of food industry effluent, cassava stillage and its anaerobic fermentation liquid, on biological nutrient removal (BNR) from municipal wastewater in anaerobic-anoxic-aerobic sequencing batch reactors (SBRs). Experiments were carried out with cassava stillage supernatant and its anaerobic fermentation liquid, and one pure compound (sodium acetate) served as an external carbon source. Cyclic studies indicated that the cassava by-products not only affected the transformation of nitrogen, phosphorus, poly-ß-hydroxyalkanoates (PHAs), and glycogen in the BNR process, but also resulted in higher removal efficiencies for phosphorus and nitrogen compared with sodium acetate. Furthermore, assays for phosphorus accumulating organisms (PAOs) and denitrifying phosphorus accumulating organisms (DPAOs) demonstrated that the proportion of DPAOs to PAOs reached 62.6% (Day 86) and 61.8% (Day 65) when using cassava stillage and its anaerobic fermentation liquid, respectively, as the external carbon source. In addition, the nitrate utilization rates (NURs) of the cassava by-products were in the range of 5.49-5.99 g N/(kg MLVSS⋅h) (MLVSS is mixed liquor volatile suspended solids) and 6.63-6.81 g N/(kg MLVSS⋅h), respectively. The improvement in BNR performance and the reduction in the amount of cassava stillage to be treated in-situ make cassava stillage and its anaerobic fermentation liquid attractive alternatives to sodium acetate as external carbon sources for BNR processes.

Effect of mixing ratio of food waste and rice husk co-digestion and substrate to inoculum ratio on biogas production.

Aim of this study was to find out suitable mixing ratio of food waste and rice husk for their co-digestion in order to overcome VFA accumulation in digestion of food waste alone. Four mixing ratios of food waste and rice husk with C/N ratios of 20, 25, 30 and 35 were subjected to a lab scale anaerobic batch experiment under mesophilic conditions. Highest specific biogas yield of 584L/kgVS was obtained from feedstock with C/N ratio of 20. Biogas yield decreased with decrease in food waste proportion. Further, fresh cow dung was used as inoculum to investigate optimum S/I ratio with the selected feedstock. In experiment 2, feedstock with C/N ratio 20 was subjected to anaerobic digestion at five S/I ratios of 0.25, 0.5, 1.0, 1.5 and 2.0. Specific biogas yield of 557L/kgVS was obtained at S/I ratio of 0.25. However, VFA accumulation occurred at higher S/I ratios due to higher organic loadings.